LT Control Cables
Control cable is designed for measuring control or regulation in the field of process automation. In addition control cable is used in the rail and transport industry, building construction, transmission, distribution and power networks. Control cables are also used in fixed installation and an interconnecting cable between fixed and mobile equipment. These are actually a two semi-conductive layers on high voltage cable, which are known as cross linked polyethylene. In this, one of the insulation is between the actual conductors and the XLPE and the other semi-con is on outside of the XLPE insulation underneath the concentric neutral. The insulation is provide from quality XLPE and sheath cab be PVC, HR PVC, FRLS, FR or HR-FRLS depending upon the application.
CONSTRUCTION
• Solid /stranded annealed copper conductor & tinned / bare
• General purpose / HR PVC insulation
• Cores laid up (filled if needed)
• FRLS / General Purpose PVC inner sheath
• FRLS/General purpose PVC outer sheath
RANGE OF LT CONTROL CABLE
• Armoured PVC Control cable 1.5 / 2.5 sq. mm. upto 37 Cores
• Unarmoured PVC Control Cables 1.5 / 2.5 sq. mm. upto 37 Cores.
• Armoured XLPE Control Cable 1.5 / 2.5 sq. mm. upto 37 Cores.
• Unarmoured XLPE Control cables 1.5 / 2.5 sq. mm. upto 37 Cores.
ADVANTAGE OF LT CONTROL CABLE
• These cables have a copper conductor, which may or may not be enveloped in galvanized steel braid.
• These cables can be manufactured as per any applicable standard.
• High tensile Strength.
• Resistant to high temperature
• Resistance to environment stress.